Panasonic PT-FRQ50W 5200 ANSI 4K Solid Shine Laser Flexible Installation White
Our Price (inc. GST):
$8,399
Average Retail:
$10,499
You Save:
$2,100
Quantity in stock
Freight Cost:
Syd:
$25.84
Melb:
$30.07
Full Australian Warranty
Australian Distributors
Product is in a sealed box
Description
|
|
PT-FRQ50 |
|---|---|
| PROJECTOR TYPE | 1-Chip DLP™ projector |
| DLP™ chip | |
| - DLP™ CHIP I Panel size |
16.5 mm (0.65 in) diagonal (16:9 aspect ratio) |
|
- DLP™ CHIP I Display Method |
DLP™ chip x 1, DLP™ projection system |
| - DLP™ CHIP I Number of pixels*1 |
1920 x 1080 pixels |
|
Light source |
Laser diodes |
|
Light output*2*3 |
5,200 lm |
|
Time until light output declines to 50 %*4 |
20,000 hours (NORMAL/QUIET)/24,000 hours (ECO) |
| Resolution |
4K (3840 x 2160 pixels) (With Quad Pixel Drive) |
|
Contrast ratio*2 |
20,000:1 (Full On/Full Off) |
| Screen size (diagonal) |
1.02–7.62 m (40–300 in), 16:9 aspect ratio |
| Center-to-corner zone ratio*2 | 90 % |
| Lens |
2.0x manual zoom (throw ratio: 1.46–2.93:1), manual focus, F 2.0–3.4, f 21.5–43.0 mm |
| LENS SHIFT (From the origin point of the lens mounter) |
|
| - Vertical |
+71 %, -48 % (manual) |
| - Horizontal |
+34 %, -27 % (manual) |
| Keystone correction range | Vertical: ±40 °, Horizontal: ±20 ° |
| Installation |
Ceiling/floor, front/rear, free 360-degree installation |
| TERMINALS | |
| - HDMI In |
HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input*5), CEC supported |
| - Computer In |
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) |
| - Monitor Out |
D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) |
| - Audio In/Out |
M3 stereo mini-jack x 2 |
| - Serial In |
D-sub 9-pin (female) x 1 for computer control (RS-232C compliant) |
| - DIGITAL LINK/LAN |
RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input*6) |
| - LAN |
RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) |
| - USB |
USB Connector (Type A) x 1 (Output 5 V/2 A) |
| Power Supply | AC 100–240 V, 50/60 Hz |
|
Power consumption |
480 W |
|
Cabinet materials |
Molded plastic |
|
Operation noise*2 |
35 dB (NORMAL/ECO) / 28 dB (QUIET) |
|
Dimensions |
498 x 168 x 492 mm (19 5/8? x 6 5/8? x 19 3/8? ) |
|
Weight*8 |
Approx. 16.1 kg (35.5 lbs) |
|
Operating environment |
Operating temperature: 0–45 °C (32–113 °F*9), operating humidity: 10–80 % (no condensation) |
|
Applicable software |
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro*10 |
Last updated: Saturday, 11 May 2024
| Do you need a Projector Screen as well? Try our Screen Site at |  |
Warranty
This product is sourced in Australia and carries a full Australian Manufacturers Warranty
